产品分类
联系我们
Hot line：0086-20-22171879/22946465（Sale Dep.）
0086-20-22171879/22948576
Mobile: 0086-13710825247 (Miss Vanessa Leung)
Mail ：ledio02@ld-cnc.com
产品中心 
cnc路由器无线DSP控制器
cnc路由器无线DSP控制器
包装部件：
1. 一个无线USB接收器
2. 一个无线手柄
直流描述
| Name | Voltage | Current | Note |
| WirelessUSB Receiver | 4．5V—5．0V | Less than 50ma
|
|
| Wireless Handle | 1．5V—3．0V | Average Current Less than 2ma | Use of time More than 2 months USE Two 2000MAH Battery |
注意：无线手柄需要两节 AA 电池
| No. | Performance or Parameters Description |
| 1 | The RF is Standard with 2.4G ISM ，the Tx power is 0DB and the RX sensitivity is -98DB |
| 2 | The RF has 64 channels，the channel gap is 1Mhz |
| 3 | The transmission distance is further than 15 meters with no barrier |
| 4 | The protocol Designed with high performance |
| 5 | To jump frequency Adaptively when noised ，which can work with 2.4G wireless Mic ，Wlan and Bluetooth etc. devices. |
| 6 | 32 sets Wireless Handle work fine at the same time in one room ，with no-interference each other |
操作步骤说明：
步骤1设置驱动软件，设置完成
第2步
打开驱动软件，然后打开NcStudio软件
步骤 3
请将无线 USB 接收器插入 USB 插孔
步骤4
将 2 节 AA 电池装入无线手柄；按下红色电源开关
售后服务说明
一年保修。以下情况除外：
1. 自行拆卸手柄，不予保修。
2.人为损坏的产品，不予保修。
